DRILL PRESS MANUAL
We reserve the right of the amendment addition and deletion of the
specifications, explanatory wording, etc. printed in this manual
5
10. WEAR PROPER APPAREL.
Do not wear loose clothing, gloves, neckties, rings,
bracelets, or other jewelry which may get caught in moving parts. Non-slip footwear is
recommended. Wear protective hair covering to contain long hair.
11. ALWAYS USE SAFETY GLASSES.
Also use face or dust mask if cutting operation is
dusty. Everyday eyeglasses only have impact resistant lenses, they are NOT safety
glasses.
12. SECURE WORK.
Use clamps or a vise to hold work when practical. It
’
s safer than
using your hand and frees both hands to operate tool.
13. DO NOT OVERREACH.
Keep proper footing and balance at all times.
14. MAINTAIN TOOLS WITH CARE.
Keep tools sharp and clean for best and safest
performance. Follow instructions for lubricating and changing accessories.
15. USE RECOMMENDED ACCESSORIES.
Consult the owner
’
s manual for
recommended accessories. The use of improper accessories may cause risk of injury.
16. REDUCE THE RISK OF UNINTENTIONAL STARTING.
On machines with magnetic
contact starting switches there is a risk of starting if the machine is bumped or jarred.
Always disconnect from power source before adjusting or servicing. Make sure switch
is in OFF position before reconnecting.
17. MANY WOODWORKING TOOLS CAN
“
KICKBACK
”
THE WORKPIECE
toward the
operator if not handled properly. Know what conditions can create
“
kickback
”
and know
how to avoid them. Read the manual accompanying the machine thoroughly.
18. CHECK DAMAGED PARTS.
Before further use of the tool, a guard or other part that is
damaged should be carefully checked to determine that it will operate properly and
perform its intended function. Check for alignment of moving parts, binding of moving
parts, breakage of parts, mounting, and any other conditions that may affect its
operation. A guard or other part that is damaged should be properly repaired or
replaced.
19. NEVER LEAVE TOOL RUNNING UNATTENDED. TURN POWER OFF.
Do not leave
tool until it comes to a complete stop.
20. NEVER OPERATE A MACHINE WHEN TIRED, OR UNDER THE INFLUENCE OF
DRUGS OR ALCOHOL.
Full mental alertness is required at all times when running a
machine.
21. NEVER ALLOW UNSUPERVISED OR UNTRAINED PERSONNEL TO OPERATE
THE MACHINE.
Make sure any instructions you give in regards to machine operation
are approved, correct, safe, and clearly understood.
22. IF AT ANY TIME YOU ARE EXPERIENCING DIFFICULTIES
performing the intended
operation, stop using the machine! Then contact our service department or ask a
qualified expert how the operation should be performed.
Additional Safety Instructions For Drill Presses
1. ALWAYS OPERATE YOUR DRILL PRESS AT SPEEDS
that are appropriate for the
文件使用
"pdfFactory Pro"
试用版本创建
