Burster 8524, Руководство по эксплуатации

Страница: 8 / 24

8
of 24
2.3.1 Storage
The model 8524 tension and compression load cell must be stored under the following conditions:
•
dry
•
no condensation
• temperature between 0 °C and 60 °C
Note: Provided the storage conditions have been observed, no special steps need to be taken after
storage and prior to commissioning.
2.3.2 Operating conditions
NOTICE
Only connect the model 8524 tension and compression load cell to instrumentation
amplifiers that are fitted with a safety transformer to EN 61558.
Transmitters connected to the outputs or other devices that are galvanically connected
to the sensor’s signal lines must also be fitted with safety transformers to EN 61558.
•
Only connect the model 8524 tension and compression load cell to instrumentation amplifiers
that are fitted with a safety transformer to EN 61558.
• Transmitters connected to the outputs or other devices that are galvanically connected to the
sensor’s signal lines must also be fitted with safety transformers to EN 61558.
2.3.3 Restrictions on use
The model 8524 tension and compression load cell does not pose a hazard if used within its specification
and in accordance with the safety regulations.
The manufacturer does not accept liability for any personal injury or property damage arising from
improper installation or operation, or from misinterpretation of measurement results.
2.3.4 Cleaning
CAUTION
Disconnect the model 8524 tension and compression load cell from the electrical
supply before cleaning.
Disconnect the model 8524 tension and compression load cell from the power supply and use a dry cloth
to clean it.
NOTICE
Do not immerse the model 8524 tension and compression load cell in water or hold it
under running water. Do not use strong cleaning agents as these may damage the
model 8524 tension and compression load cell. Clean the model 8524 tension and
compression load cell using a dry cloth.