Burns & Barkles 010382, Руководство по эксплуатации

Страница: 30 / 38

EN
30
SYMBOLS
Read the instructions!
Approved in accordance with the relevant
directives.
Recycle discarded product in accordance
with local regulations.
TECHNICAL DATA
Gas and supply pressure Butane/propane 30 mbar
Product category I3B/P(30)
Injector size, main burner Ø 0.82 mm
Injector size, side burner Ø 0.85 mm
Total nominal heat output 14.0 kW/1019 g/h
Lighting Integrated
Grill surface
63 x 41.5 cm
Max weight, side shelf 2.5 kg
Max weight, side burner, including pan 2.5 kg
Max pan size, side burner Ø 24 cm
Min pan size, side burner Ø 8 cm
Gas cylinder
Max height 595 mm
Max diameter 304 mm
Max content 11 kg
DESCRIPTION
Stable grill with 4+1 burners that give four separate hot zones
and one practical side burner for cooking in a pot or frying pan.
Four burners mean that indirect grilling can be used by not
lighting the middle burners. More uniform distribution of heat is
obtained thanks to the cast iron grill rack. The double insulated
lid also helps to keep the heat inside the grill. The grill has a
thermometer in the lid, a side table, and underneath there is a
cupboard for grill accessories. Regulator set and other accessories
sold separately in Jula’s department stores and at www.jula.com.
Component parts.
FIG. 1
ASSEMBLY
NOTE:
Some components have sharp edges/corners. Handle all parts
carefully to avoid cutting yourself. Wear safety gloves.
• To assemble you need a screwdriver and spanner.
• Remove all the parts from the packaging and sort before
assembly.
• Assemble the grill on a level surface.
• See figures for correct order of assembly.
FIG. 2 – 13
USE
SUITABLE GAS CYLINDER
Gas cylinders are available in many different sizes. The figure
shows the maximum size of gas cylinder. For other information
technical information, see section Technical Data.
FIG. 14
HOSE AND PRESSURE REGULATOR
• The hose and pressure regulator must be suitable for gas
(propane/butane).
• The hose and pressure regulator must withstand the
specified pressure.
• The maximum length of the gas hose is 1500 mm.
• An adapter for connection between the hose/pressure
regulator and product is included.
• Check the connecting parts and rubber rings before
connection. Replace the hose if it is cracked, or shows signs
of wear or other damage.
• Do not bend or twist the hose when in use.
• Use a safety device in the event of hose failure (sold
separately).
FIG. 15
GAS REGULATOR
The gas regulator should be replaced after 10 years at the most.
The date of manufacture is given on the gas regulator, see figure.
The first two figures indicate the year, followed by a letter for the
month (A for January, B for February, C for March, etc).
FIG. 16
NOTE:
•
Hose and pressure regulator. The figures are only intended
as an illustration.
• Only use a gas regulator certified in accordance with
EN 16129.
POSITIONING OF GAS CYLINDER
Place the gas cylinder on a level, stable surface near the product.
Never put the gas cylinder in the cupboard under the product.
Make sure not to damage the hose.
1. Gas connection
2. Hose
3. Gas cylinder
4. Gas regulator
5. Hose
FIG. 17