BURNiT PM 15kW, Инструкция по установке и обслуживанию

Страница: 8 / 56

8 - EN
Installer / Service Manual BURNiT Comfort PM/PM-B
Functional description of the controller for pellet stoves BURNiT Comfort PM (with water jacket) /
PM-В (with water jacket and metal insulated door)
This instruction describes the controller of the IO23. This controller is used for pellet stoves/boilers
using wooden pellets as fuel. It commands all the operations of the product by means of certain
numbers of inputs and outputs.
The controller consists of main board with connectors. They are used for connection of:
Display, several sensors, fans, pump, container/auger, heating element, alarms, communication
interface (RS232, Bluetooth….)
The controller could be additionally equipped with : Weekly timer (chrono-thermostat), remote
control, plastic (ABS) standard box or plastic UL 94 in box, LCD console .
Norms: EN 55011, EN 6100-3-2, IEC/EN 61000-4-2,-4,-5,-6,-8,-11,-29
Used abbreviations:
BI.PEL – flame off
ACCEND. – heating element
C.RISC. – pump – central heating
C.SAN – pump – DHW (domestic hot water)
ALF – Main safety thermostat or thermostat for container/auger
EEPROM - ELECTRICALLY ERASEBLE PROGRAMMABLE READ ONLY MEMORY
Controller technical data
Electricity 230V, 50/60Hz
Max. consumation – without 50mA consoler, with 55mA console
Inputs

Exhaust gases temperature – type J

Ambient thermostat – contact

NTC sensor room temperature - NTC 10
 NTC sensor water temperature – NTC 10

NTC sensor pellets temperature – NTC 10

Main safety thermostat 230V

Safety pressure regulator 230V
Outputs
 Exhaust gases fan – 230V (TRIAC)

Pump no. 1 – 230 V (TRIAC)

Pump no. 2 – 230 V (TRIAC)

Pump no. 3 – 230 V (TRIAC)

Gear motor – 230 V (TRIAC)

Heating element 230 V (TRIAC)
Working environment of the controller
Working temperature – 0°C till +60°C
Storage temperature – -10°C till +60°C
Max. humidity (no condense) -95%
Mechanical data of the controller
Dimensions of the main board (125x 101 x 33mm)
Weight – 250 g
Dimensions plastic (ABS) box – (189 x 110x 70mm)
Mounting position (not applicable)
Protection degree of the plastic (ABS) box – IP 21