Burley R6208A, Руководство пользователя

Страница: 12 / 17

UŽÍVATEĽSKÝ MANUÁL MIEŠAČOV - MODELY R6208A, R6208B, R6208C
Strana 12 z 17
3. SAFETY INSTRUCTIONS
The following pictograms appear throughout these operating instructions:
Indicates danger of injury, risk to life and possible damage to the appliance if these instructions are not followed.
Indicates the presence of electrical current.
Read through these operating instructions carefully before using the appliance. Become familiar with the
functions and method of operation. To ensure proper operation, always maintain the appliance according to the
instructions. The operating instructions and associated documents should always be kept close to the appliance.
When using power tools, you must observe the following basic safety precautions in order to ensure protection
from electric shocks, injury and fire. Read and follow all the instructions before using this power tool. Look after
the notes on safety.
Always check if your mains voltage corresponds with the value on the type plate
The machine has been double-insulated in accordance with EN60745: therefore, an earth wire is not necessary
USE CORRECT SUPPLY VOLTAGE: The power supply voltage must match the information quoted on the
tools identification plate.
USE PROPER EXTENSION CORD:
Only use an approved extension cable that is suitable for the machine's
power. The cord must have a diameter of at least 1.5mm
2
.When the extension cable is on a reel, unroll the cable
in its entirety.
SWITCH OFF THE MACHINE IMMEDIATELY IN CASE OF:
1. Malfunction in the mains plug, power cable or damaging of cable.
2. Broken switch.
3. Smoke or stench of scorched insulation.
4. GENERAL SAFETY RULES
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit . Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases or dust. Power tools create sparks which may ignite the
dust or fumes.
c)
Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of
electric shock.
b)
Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric shock if your body is earthed or grounded.
c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk
of electric shock.