Page 14 of 20
Assembly and Installation of the Stove Fire Bricks and Baffle
Having positioned your Burley stove and connected it to a chimney with flue pipe, you need to
assemble the inside parts.
There are five internal components: top brick, two side cheeks, a rear brick and a stainless steel
baffle.
Fitting of Stove Bricks
To fit the vermiculite bricks:
Place the left side in so the longer edge is at the front
and the shorter edge at the rear.
Put the top brick in the stove so the rounded edges are
at the back and the flat surface is up. The top brick
should stay in place by resting it on the side brick and
the top of the square metal tubes.
Place the right side in so the longer edge is at the front
Place the back in.
Slide the top brick backwards so the lip sits over the
back and side bricks, keeping them in place and
ensuring there is no gap at the back.
The base brick should already be fitted.
Fitting the Stainless Steel Baffle Plate
Fit the plate by putting the legs of the plate on top of the rear
square metal tubes, you may need to lift the top brick. Bring the
plate forward so it sits on the ledge above the door. Check that
the top brick is still at the back of the stove and has not moved
forward.
When sweeping the chimney or carrying out regular maintenance
on the stove, reverse the above procedure, clean the chimney
and the top surface of the top baffle and the stainless steel mesh,
then reposition all the components.
Log Retaining Bar
Fit the log retaining bar so the angled return
is pointing into the stove. This will help to
keep the glass clean.
