Burley D'Lite X, Руководство пользователя

Страница: 7 / 40

OWNER’S INSTRUCTION & SAFETY MANUAL 7
BURLEY.COM ENG
Stroller wheel must always be folded up, in trailer mode,
before pulling behind a bicycle. Failure to position stroller
wheel in trailer mode before cycling could result in an
accident and serious injury or death.
WARNING
Figure 14
Figure 18
Figure 15
Converting to Stroller Mode
1. Pull fork as shown (Figure 14), then rotate wheel down fully. Fork
will automatically secure into the locked position.
2. Adjust tow bar into the strolling position (Figure 15) by removing
the secondary retaining pin and pulling on the Quick Receiver
release handle, sliding the tow bar further in towards the trailer
until it locks into place, and then re-installing the secondary
retaining pin.
Converting to Trailer Mode
1. Pull fork down (Figure 17) and rotate up into trailer mode as
shown. Fork will automatically lock into trailer position when
positioned correctly (Figure 18).
2. Adjust tow bar into trailer position by removing the secondary
retaining pin and pulling on the Quick Receiver release handle,
sliding the tow bar out away from the trailer until it locks into
place, and then re-installing the secondary retaining pin.
Figure 16
Attaching the Jogging Tether
Wrap the strap around the handlebar center, slide the tether end
through the loop on the other end of the strap and tighten securely
(Figure 16).
Figure 17