Installing Wheel Guards
1. Match holes in wheel guards with holes on outside of lower
side frame tubes.
2. From inside the frame, insert wheel guard screws through
frame tube and wheel guards. Tighten securely.
FIGURE 1
Opening and Closing Your Trailer
1. Rotate front tube upward and rear tube back until they
meet on plastic saddles.
FIGURE 2
2. Rotate frame locks and snap onto rear tube.
FIGURE 3
3. To close trailer, unclip seat buckles on back of seat and
reverse opening process.
Note:
To allow folding, the side battens in the d’lite trailer are
not attached to the sides in the rear.
To view a video clip of “Folding a Burley”
go to: www.burley.com/support/tutorials.cfm.
FIGURE1:
Wheel guard installation
FIGURE 2
FIGURE 3
4
B U R L E Y D ’ L I T E , E N C O R E A N D S O L O O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L
CHECK THAT THE FRAME LOCKS ARE PROPERLY ENGAGED
BEFORE USING THE TRAILER. FAILURE TO DO SO CAN RESULT IN
SERIOUS INJURY.
WARNING
TRAILERS CAN TIP OVER, CAUSING DAMAGE TO TRAILER AND
SERIOUS INJURY TO PASSENGERS. AVOID CAUSES OF TIP OVER,
ESPECIALLY:
• CHILDREN LEANING OR BOUNCING
• HITTING POTHOLES, CURBS, OTHER ROAD OBSTRUCTIONS
• TAKING TURNS TOO FAST
• SUDDEN SWERVING
• IMPROPER WHEEL INSTALLATION OR TIRE INFLATION
WARNING
Lower Side
Frame Tube
Wheel Guard
S
crewS
Frame Locks
Front
Rear
Plastic Saddles
