Bürkert 8222 ELEMENT NEUTRINO, Руководство по эксплуатации

Страница: 20 / 72

20
Assembly
7.3 Mounting the housing lid
1
2
→
Check that there is a seal on the housing and that it is not damaged. Replace
the seal if necessary.
→
Grease the seal if necessary, using a component compatible with the seal
material.
→
[1] Set the housing lid to ensure that the 4 grooves of the housing lid match
with the 4 pins of the housing.
→
[2] Turn the housing lid clockwise with an angle of about 15° to lock it.
Fig. 7 : Closing the housing lid
7.4 Mounting the display module
notice
the tightness of the device is not guaranteed when the housing lid is removed.
▶
Prevent the projection of liquid inside the housing.
the device may be damaged if a metal component comes into contact with the electronics.
▶
Prevent contact of the electronics with a metallic item.
20°
→
Remove the housing lid. Refer to chpt. 7.2.
→
Set the display module at an angle of ca. 20° in relation to the
desired position.
a)
b)
c)
d)
→
The display module can be mounted in 4 different positions,
at 90° intervals.
→
Fully push in the display module and turn clockwise to lock it.
→
Put the housing lid back.
Fig. 8 : Mounting the display module
English
Type 8222 ELEMENT