manualshive.com logo in svg

Bürkert 8202 ELEMENT, Руководство по эксплуатации

Поделиться
Скачать
Bürkert 8202 ELEMENT Скачать руководство пользователя страница 7

7

AbouttheOperatingInstructions

1 

AbouT ThE opErATiNg iNsTrucTioNs

The Operating Instructions describe the entire lifecycle of the device. Please keep the Operating Instructions in a 
safe place, accessible to all users and any new owners.

the operating instructions contains important safety information.

Failure to comply with these instructions can lead to hazardous situations. Pay attention in particular to the 
chapters "Basic safety information" and "Intended use".

 

▶

Irrespective of the device variant, the Operating Instructions must be read and understood.

1.1 

Definition of the word "device"

The word "device" used within these Operating Instructions refers to the Type 8202 ELEMENT pH-meter and 
redox-meter.

1.2 

Validity of the operating instructions

The Operating Instructions are valid for the Type 8202 ELEMENT pH-meter and redox-meter, version V2, .

Mention V2 is given on the device Type-label. Refer to chpt. 5.4. 

1.3 

symbols used

Danger

Warns against an imminent danger.

 

▶

Failure to observe this warning can result in death or in serious injury.

Warning

Warns against a potentially dangerous situation.

 

▶

Failure to observe this warning can result in serious injury or even death. 

Caution

Warns against a possible risk.

 

▶

Failure to observe this warning can result in substantial or minor injuries. 

notiCe 

Warns against material damage.

Advice or important recommendations.

Refers to information contained in the Operating Instructions or in other documents.

English

Type 8202 ELEMENT

Содержание 8202 ELEMENT



















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды