Burkert Type MS01, Руководство по эксплуатации

Страница: 34 / 88

34
pH sensor - Diagnostics
12
ph SenSor
-
mAIntenAnce
→
Go to device pH sensor MS01 function pH sensor tab Maintenance . Fig. 8 displays the
menu.
Diagnostics
pH sensor MS01 | pH sensor < Maintenance
pH offset
7.00 pH
pH slope
–55.00 mV/pH
Simulation
Temperature calibration
pH calibration
Calibration schedule
Restore factory values
Parameter Maintenance
Fig. 8: Maintenance menu of the function pH sensor
The menu items are detailed in the following chapters:
•
pH offset , pH slope , refer to chpt. 12.1.
•
Simulation , refer to chpt. 12.4 and 12.5.
•
Temperature calibration , refer to chpt. 12.2.
•
pH calibration , refer to chpt. 12.1.
•
Calibration schedule , refer to chpt. 12.3.
•
Restore factory values , refer to chpt. 12.6 and 12.7.
12.1 Calibration of the pH sensor
Calibration of the pH sensor is required to measure pH values with as less deviation as possible.
→
Calibrate the product every 3 months with one of the following means:
•
Adjust by hand the slope value and the offset value of the pH-sensor calibration-curve. Refer to
chpt. 12.1.1.
•
Do a 1-point calibration procedure to automatically adjust the offset value of the pH-sensor calibration-
curve. Refer to chpt. 12.1.2.
•
Do a 2-point calibration procedure to automatically adjust the offset value and the slope value of the pH-
sensor calibration-curve. Refer to chpt. 12.1.3.
12.1.1 Manually calibrate the pH sensor
→ Make sure that the login user level is Installer . Refer to chpt. 9.4.
→
Go to device pH sensor MS01 function pH sensor tab Maintenance .
→
Select pH offset and enter a pH value. Validate with .
The new offset value is used by the product. The offset value is updated in the Diagnostics tab.
English
Type MS01