manualshive.com logo in svg

Burkert 8791 REV.2, Руководство по эксплуатации

Поделиться
Скачать
Burkert 8791 REV.2 Скачать руководство пользователя страница 73

73

Start-up

16 

START-UP

16.1 

Safety instructions

WARNING!

Risk of injury due to improper operation.

Improper operation may result in injuries as well as damage to the device and the area around it. 

 

▶

Before start-up, ensure that the operating personnel are aware of and have completely understood the 

contents of the operating instructions.

 

▶

The safety instructions and the intended use must be observed.

 

▶

Only adequately trained personnel may start up the system/device.

16.2 

Defining base settings

The base settings of the positioner are configured in the factory.

To adapt the positioner to the local conditions, the 

X.TUNE

 function must be executed after installation.

16.2.1 

Execute the 

X.TUNE

 automatic adjustment

WARNING!

Risk from changing the valve position when executing the 

X.TUNE

 function.

If 

X.TUNE

 is operated under operating pressure there is an acute risk of injury.

 

▶

Never execute X.TUNE

 when a process is running.

 

▶

Secure the system against unintentional activation.

NOTE! 

Avoid incorrect controller adjustment from incorrect supply pressure or activated operating medium 

pressure.

 

▶

Always

 execute 

X.TUNE

 in case of supply pressure (pneumatic auxiliary power) present in later 

operation.

 

•

Ideally, execute the 

X.TUNE

 function 

without

 operating medium pressure to prevent interference as a 

result of flow forces.

 

 

→

Unscrew the four screws on the housing cover and remove the housing cover.

To execute 

X.TUNE

 the positioner must be in AUTOMATIC operating state 

 

(DIP switch 4 = OFF).

Type 8791, REV.2

english

Содержание 8791 REV.2


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды