Burkert 1094 Series, Руководство по эксплуатации, Страница: 10 / 64

english
8 - 1094
english
Carefully insert the blade of the screwdriver
under the manifold, and lever it out
(Diagram 2).
Turn the manifold to the desired position.
Insert the manifold into the housing until it
latches in.
Diagram 2: Turning the manifold
4.2 Setting up the electronics
4.2.1 DIP-switches
Select the PWM frequency and the desired standard signal input (only applies to the
standard rail electronics Type 1094-PHR) corresponding to the listed valve types.
NOTE
The standard signal input must be determined before connecting
the operating voltage.
ATTENTION!
Only work on the equipment when all voltages have been
removed!
Ensure that the cables ends do not become twisted!
The apparatus socket may only be pushed onto the
connector flags with the fixing screw assembled.