Burke TRI-FLEX II Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 27

Burke TRI-FLEX II Скачать руководство пользователя страница 4

2

•

Risk of electrical shock, do not remove control unit back cover.

•

Refer servicing to qualified service personnel.

•

Equipment should only be connected to a properly grounded three pronged wall outlet,

using 10 foot (305 cm) hospital grade power cord provided with the product.

MANUFACTURER’S LIABILITY

BURKE INC.’S original warranty on the Burke Low Air Loss Support System will remain

in effect during the warranty period, provided any changes, readjustments, or repairs have

been carried out by a factory authorized service center or a technician of BURKE INC., or

whenever the control unit and mattress system has been used according to the following oper-

ating instructions.

BURKE INC.’S liability under the warranty is the repair or replacement provided and,

in no event, shall BURKE INC.’S liability exceed the purchase price paid by the customer for

the product. Under no circumstances shall BURKE INC. be liable for any loss, direct, indirect,

incidental, or special damages arising out of or in connection with the use of this product.

INFORMATION CONTAINED IN THIS OPERATING INSTRUCTION MANU-

AL IS SUBJECT TO CHANGE WITHOUT ANY PRIOR NOTICE.

!

•

Never drop or insert any object into any opening of the control unit.

•

Please read this manual before operating Burke Low Air Loss Support

System. If you are unable to understand the manual fully or partially, please

contact your dealer or the manufacturer before attempting to use this equip-

ment. Otherwise personal injury or property damage may result.

In the event of mechanical damage or any issue which may compromise prod-

uct performance or patient safety, discontinue use and contact qualified ser-

vice personnel or distributor immediately.

!

!

«
...
2
3
4
5
6
...
»

Содержание TRI-FLEX II




























Отзывы:

Нет отзывов