manualshive.com logo in svg

Burke TRI-FLEX II, Руководство по эксплуатации, Страница: 11 / 27

Поделиться
Скачать
Burke TRI-FLEX II Скачать руководство пользователя страница 11

9

SAFETY INSTRUCTIONS

• 

  Always consult the patient’s physician before using the Burke Low Air Loss Support 

System for contra indicated conditions.

• 

  To avoid damaging your Burke Low Air Loss Support System control unit (A), before 

operating be sure the AC power (X) available at your location matches the power require-

ments printed on the product identification label on the back of the unit. 

 

• 

  To avoid electric shock, always plug in the power cord of the control unit into a prop-

erly grounded power source (X).

 

•  

 Do not insert items into any openings of the control unit (A).  Doing so may cause 

fire or electrical shock by shorting internal components.

 

• 

  Do not spill liquids or food on or into the control unit (A).  In the event of any spill-

age, immediately turn off the control unit and disconnect it form the power source (X).  Re-

turn the control unit for servicing to a factory authorized service center.

• 

  Care should be taken such that the controls on the footboard of the bed frames are 

not obstructed by the Burke Low Air Loss Support System control unit.

 

• 

  Care should be taken such that the control unit (A) is not blocked, and kept away 

from any heat sources or radiators during the operation of the unit.  

 

• 

 Care should be taken such that the power cord (Q) of the control unit is not pinched, 

or has any objects placed on it, and also ensure it is not located where it can be stepped on 

or tripped over.

• 

  Do not attempt to service the control unit except as explained in this operating 

instructions manual.  Contact factory for servicing instructions.  Always follow operating and 

service instructions closely.

• 

  Do not place the patient directly on the mattress without the top sheet.  Breathable 

nylon top sheet is water repellent, highly vapor permeable, anti-microbial, low friction and 

low shear quilted reusable top sheet.  

• 

       The control unit enclosure should only be opened by a factory authorized quali-

fied service technician.

• 

  Smoking by the patient or anyone else around or on the Burke Low Air Loss Sup-

port System is prohibited.  Burke Low Air Loss Support System uses room air for circulation 

through the mattress, smoking will contaminate the system.

!

!

!

!

!

!

!

!

!

Содержание TRI-FLEX II




























Отзывы:

Нет отзывов