Step 7:
Place the 27 Lite Side Rails onto the Rear Risers and place a 3/8-16 x .75”
UNC Hex head fastener with a lock washer and flat washer into each of the eight
designated holes. See Exploded View 6 for the stack up.
Only tighten fasteners
finger tight for now.
Step 8:
Place an End Bracket (REP-05) onto each end of the 27-Lite Side Rails as
shown below. Then place a 3/8-16 x .75” UNC Hex head fastener with a lock washer
and a flat washer into each of the eight designated holes. See Exploded View 7 for
the stack up.
Only tighten fasteners finger tight for now.
END BRACKET
(REP-05)
Exploded View 6
Exploded View 7
4X
4X
PRM-SERIES REDI RACK™
Page 13 of 15
©2016 Burco, Inc.
