CLEANING
REMOVING OVEN PARTS FOR
CLEANING
Inner Door Glass
•
The inner door glass panel can be
removed for cleaning but it must be
replaced the right way up. If there is
any writing on the glass, you must be
able to read it clearly when the cavity
doors are open.
•
Always make sure that the glass is
pushed fully into the Stop position.
•
To remove the glass panel, open the
door wide, hold the top and bottom
edges and slide out.
• Warning: do not operate the appli
-
ance without the glass panel correctly
fitted.
•
For your safety, glass door panels are
made of toughened glass. This en-
sures that, in the unlikely event that
a panel breaks, it does so into small
fragments to minimise the risk of in-
jury. Please take care when handling,
using or cleaning all glass panels, as
any damage to the surfaces or edges
may result in the glass breaking
without warning or apparent cause at
a later date. Should any glass panel
be damaged, we strongly recommend
that it is replaced immediately.
Shelf Runners
•
Shelf runners can be removed to
enable you to clean them thoroughly.
Make sure they are cool to touch and
then grasp the runners and slide out
of their hanging holes.
Pull out to clean