![background image](http://html1.mh-extra.com/html/buoyant/wm1l1/wm1l1_installation_2831302003.webp)
3
SLIDE ANCHOR ASSEMBLY
4
Before you pull down your installer can draw a
level line on the wall to ensure that the wall
mount screwed into the wall leveled. Use the
appropriate screws, bolts and washers (4 sets)
to secure bottom bracket to wall.
SECURE BOTTOM BRACKET TO THE WALL
5
Slide the anchor assembly inside the large
holes of the bottom wall mount.
NOTE: Anchor assembly should only extend 2mm
below the bottom wall mount as shown below.