BUNNING LOWLANDER MSL60, Инструкция и каталог запасных частей

Страница: 16 / 87

LOWLANDER MSL60 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
16
3.
Grease the CV Joint of PTO shaft (15 pumps)
4.
Grease suspension system spring bushings on each side.
5.
Grease brake pivot bushings (Tandem Suspension machines).
6.
Grease parking brake leaver joint.
7.
Check and adjust the apron chain tension. Refer to section 5.2.2 - page 50.
ANNUALLY
1. Change oil to all gearboxes.
2. Check the condition of the frame sealing flaps. Replace if not sealing the sides or bottom.
a. Front.
b. Rear Slurry Door Auger Deck.
3. Check brake setting.
Brakes can be checked by depressing the brake petal with the engine running and the
tractor in gear; release clutch to determine brake adjustment.
4. Check condition of rotor blades and paddles. Repair when there are loose bolts, cracked
welds, chipped, bent or broken blades or paddles. Replace when any components are worn
within 1 inch (25 mm) of flighting.
5. Clean machine.
6. Check general hardware/bolt tightness. Retighten if necessary.
It is recommended to apply waste oil to the floor chains periodically when spreading dry material
and particularly at the end of the spreading season. This assists in the smooth running of the
machine and prolongs the working life of the components.