BUNNING Lowlander MK4, Инструкция по эксплуатации

Страница: 89 / 138

LOWLANDER MK4 MANURE SPREADER – INSTRUCTION & SPARES MANUAL
Page
84
6.3.8.5 FITTING THE SPRING PARKING BRAKES
With the spring parking brakes please do the following to help you remove the internal threaded rod;
- Fit the spring brakes to the Trailer/ tanker as normal connecting the service pipe to port 11 (normal brakes)
and the spring brake pipe to port number 12.
- Connect the red and yellow lines to a tractor, to fill with air.
- Push the red button/knob in (the park button on the park and shunt valve), this will loosen the threaded bar
at the back of the spring brakes, you can now twist this out easily and store them in the storage place on the
side of the actuator. Finally put the plug in this hole.
To test the spring brakes just do the following;
- Making sure that there is no brake or handbrake applied (if connected to a tractor), just pull the red park
button/knob and you will see the spring brakes apply, at the same time you will hear quite a lot of air
exhaust.