Bracket A must be between 1020mm
and 1050mm from ground level
Top of latch must
be minimum of
1500mm from
ground level.
A
Step 1 & 2
Leave this screw
out until Step 3
Bracket B should
be as high as
possible within
specifi ed range
min 150mm
max 400mm
B
Step 3
HANDLE
Optional handle can be fi xed to gate if required.
Step 5
Gap adjustment
clockwise to increase
Step 6
Step 4
Align
IMPORTANT GAP
3mm-6mm
Step 7
LATCH
1. Position latch bracket A (lower bracket) between 1020mm &
1050mm from ground level. Fix to post with two screws, leaving
the bottom screw out until later (Step. 3).
2. Place latch bracket B (upper bracket) as high as possible within
specifi ed range from bracket A – min. 150mm, max 400mm.
3. Starting at the top slide latch body fully down onto brackets,
then screw to lower bracket.
STRIKER
4. Align Striker bracket with latch using
the alignment notches.
5. Screw bracket to gate using screws
provided.
6. Slide Striker onto bracket, fi x using
adjuster screw
7. Adjust striker clearance 3mm-6mm
turning the adjuster screw clockwise
to increase.
G8
SAFE
G8
SAFE
.com.au
CREATING WAVES FOR POOL SAFETY
