background image

3

INTRODUCTION

This equipment supplies a liquid mix to the hoppers on the ULTRA-2 dispenser.  It is for indoor use only on a 

sturdy counter or shelf.

00656.0001

00986.0000

USER NOTICES

Carefully read and follow all notices on the equipment and in this manual.  They were written for your protection. 

All notices are to be kept in good condition.  Replace any unreadable or damaged labels.

As directed in the International Plumbing Code of the 

International Code Council and the Food Code 

Manual of the Food and Drug Administration (FDA), 

this equipment must be installed with adequate 

backflow prevention to comply with federal, state 

and local codes. For models installed outside the 

U.S.A., you must comply with the applicable Plumb-

ing /Sanitation Code for your area.

Artwork for P/N:  00656.0001
Artwork Rev:  A
Drawn:  REF
Date:  04/22/10

Push back until fully latched

before removing or manually

filling chilled product hopper.

34561.0000

To reduce the risk of electric shock,
do not remove or open cover.
No user-serviceable parts inside.
Authorized service personnel only.
Disconnect power before servicing.

WARNING

37881.0000

00824.0002

44795.1 011216

Содержание LAFT









Отзывы: