Bunn ITCB DV, Инструкция по установке и эксплуатации

Страница: 11 / 19

Page 11
IMPORTANT PROGRAMMING NOTES
- READ CAREFULLY -
Always remember to place a container and funnel under the sprayhead when operating the brewer during the
set-up of
CALIBRATE FLOW,
and testing the brew and bypass valves in
SERVICE TOOLS/TEST OUTPUTS.
HOW TO ACCESS PROGRAMMING
To enter programming mode, the home screen must be present on the
display. Touch the BUNN logo at the top of the display for 2 seconds.
The SERVICE ACCESS screen will appear on the display.
HOW TO EXIT PROGRAMMING
To exit the programming mode at any time, select the BUNN logo at the top of the display. The display will return
to the home screen.
If there is no interaction with the touchscreen within a 5-minute period while in programming mode, the display
will automatically return to the home screen.
SERVICE ACCESS
To access this menu, touch the BUNN logo for 2 seconds with the home screen present. This is the first screen
that will appear on the display when accessing programming mode. If Programming Lockout is enabled, the
advanced icon will not appear until the feature is disabled. Select any icon to access the sub-menus.
M
L
S S
M
L
BREW
REGULAR
BREW
DECAF
Touch for 2 seconds
PROGRAMMING LOCKOUT
This switch is located on the graphics board located under
the top panel of the brewer. The switch can be set to prevent
access to the advanced programming settings of the brewer.
Once all the correct brew settings are programmed, the
operator can set the switch to the "ON" position to prohibit
anyone from viewing and changing settings. The brewer
must be powered down when setting the switch.
SERVICE
RECIPES STATISTICS
ADVANCED CARE & CLEANING
ACCESS
55502
000000