manualshive.com logo in svg

Bunn ingle Multi- BrewWISEDBC WITH SMART FUNNELTM, Инструкция по установке и эксплуатации, Страница: 26 / 50

Поделиться
Скачать
Bunn ingle Multi- BrewWISEDBC WITH SMART FUNNELTM Скачать руководство пользователя страница 26

Page 26

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

Setting Pulse Brew - BY EXAMPLE:

1. This display should read 

CONTAINER READY?

Place a container under the sprayhead. Place a
brew funnel containing a filter and grounds on top
of the GPR server so that the spray and coffee
bed can be viewed.

2. Choose the batch size to be set by pressing the

pad next to the indicator light on the left brew side.
The batch size indicator selected will be flashing.

3. If everything is in place, press YES in the 

CON-

TAINER READY?

 screen. The display should read

PRESS BREW TO START 1ST ON TIME.(a)

4. Press and release the "BREW" pad. The brew wa-

ter will start to flow into the funnel and the water
level will rise.

(b)

5. Watch the flow of water. When it reaches the de-

sired level in the funnel, press and release the
"BREW" pad again to end the 

1ST ON TIME.(c)

6. The spray will stop and the brew funnel will start

to empty. When the water level in the funnel drains
to the desired level, press "BREW" again to end
the 

OFF-TIME

. This also begins the spray of wa-

ter for the final setting.

(d)

7. The brew water will begin again and the water level

in the funnel will rise. Watch the flow of water.
When it reaches the desired level, press "BREW"
to end the 

LAST ON TIME.(e)

8. The display should now show the 1st, off and last

times for the batch size just programmed. After a
5 second delay, the display will read 

BATCHES

DONE? (f and g)

9. If other batches need to be modified, press 

NO.

The display will go back to 

SET BY EXAMPLE.

Press 

YES

, then press a different batch size pad

and repeat steps 1 through 8.  Repeat until all the
desired batch sizes are set for the left side. 

(g)

10. When finished press 

YES

 in 

BATCHES DONE?. 

The

display will then read

 SET PREINFUSION. 

Another

alternative is to press the "ON/OFF/LOWER" pad
located on the front panel of the brewer to exit

SET PULSE BREW

 and return to the 

MAIN

SCREEN

.

NOTE: 

Pressing ® before reaching the final setting

screen exits the setup and retains the old values.

SET BY EXAMPLE

RETURN TO

SET BY EXAMPLE

SEE 

MODIFYING

PREINFUSION

5 SEC. DELAY

CONTAINER RDY?
QUIT                YES

PRESS BREW TO

SET 1ST ON TIME

PRESS BREW TO

END 1ST ON TIME

PRESS BREW TO

END OFF TIME

PRESS BREW TO

END LAST ON TIME

1ST       OFF     LAST
X:XX     X:XX     X:XX

SET PREINFUSION?

NO                     YES

BATCHES DONE?

NO                     YES

P3217

37467  110904

Содержание ingle Multi- BrewWISEDBC WITH SMART FUNNELTM



















































Отзывы:

Нет отзывов