Bunn Dual SH BrewWISE, Техническое учебное пособие

Страница: 7 / 26

Bunn-O-Matic Corporation
7
Setup and Programming
The BrewWISE
®
software is the latest evolution of BUNN’s digital brewer control (DBC
®
) system. The software allows
precise brewing control and multiple extractions recipes to be stored on the brewer and onboard troubleshooting
capabilities for the technician. The software also allows the brewer to communicate with a DBC
®
grinder, to reduce
operator errors when selecting products and batch sizes.
Accessing and using the brewer’s programming features is done from the front panel and requires no special tools.
The programming menu is accessed by pressing the hidden switch, located under the trademark symbol, on the right
side of the Bunn logo. The hidden switch on the left side will allow you to scroll backwards.
1 Right Hidden Switch:
This is used to access the programming mode and is also used to scroll forward through the
function list.
2 Left Hidden Switch:
This is used to scroll backwards through the function list.
3 Digital
(lower left under the display): This is used to select options that appear on the display during programming.
4 Brewer
(center under the display): This is used to select options that appear on the display during programming.
5 Control
(lower right under the display): This is used to select options that appear on the display during
programming.
Programming Lockout
If the programming cannot be accessed then the programming lockout switch
is in the Disable position. The switch is located on the control board. Remove
the top panel, locate the switch and place it into the Enable position.
Level 1 Programming
Press the hidden switch for one second to access.
Level 2 Programming
Press and hold the hidden switch for 5 seconds.
This screen is for setting water volumes for the Brew (dump) valve and the Bypass valve.
Pulse Brewing will also be found in this screen.
PROGRAM
ENABLE
DISABLE
2
1
3 4
5
BREW LOCKOUT ?
ON OFF DONE
SET NEW RECIPE ?
NO YES