Bunn Dual SH BrewWISE, Техническое учебное пособие

Страница: 24 / 26

Dual SH BrewWISE ® Training Manual
24
If the control board loose contact with the temperature sensor or senses shorted
connection it will display this message.
Operator Fault Messages
The following fault messages will appear on the display if the operator needs to take corrective action.
The brewer does not sense a server in place. The brewer will only display this message
if Yes has been selected in the Server Detect programming menu. Otherwise the unit will
brew.
The brewer does not sense a funnel in place. The brewer will only display this message
if Yes has been selected in the Funnel Detect programming menu. Otherwise the unit will
brew.
Wait for the brewer to heat up to proper temperature. The brewer will only display this
message if the Brew Lockout feature is set to NO.
The brewer did not see the funnel removed since the previous brew cycle.
The funnel was removed during the brew cycle. Only applicable if the brewer does not
have a funnel lock solenoid.
The server was removed during the brew cycle.
The brew switch was turned off during the brew cycle.