Page 2
For technical questions, please call 1-800-444-3353.
SKU 94747
Save this Manual
You will need the manual for
the safety warnings and precautions,
assembly instructions, operating and
maintenance procedures, parts list and
diagram. Keep your invoice with this
manual. Write the invoice number on the
inside of the front cover. Keep the manual
and invoice in a safe and dry place for
future reference.
SaFety WarningS anD
precautionS
Warning: When using tool, basic
safety precautions should always
be followed to reduce the risk of
personal injury and damage to
equipment.
read all instructions before using
this tool!
Keep work area clean
1.
. Cluttered
areas invite injuries.
observe work area conditions
2.
. Do
not use machines or power tools in
damp or wet locations. Don’t expose
Control Unit to rain. Keep work
area well lit. Do not use electrically
powered tools in the presence of
flammable gases or liquids.
Keep children away
3.
. Children must
never be allowed in the work area.
Do not let them handle machines,
tools, or extension cords.
Store idle equipment
4.
. When not
in use, tools must be stored in a dry
location to inhibit rust. Always lock
up tools and keep out of reach of
children.
use the right product for the job
5.
.
Do not attempt to force a small light or
attachment to do the work of a larger
industrial light. There are certain
applications for which this product
was designed. It will do the job better
and more safely at the rate for which
it was intended. Do not modify this
item and do not use this product for a
purpose for which it was not intended.
Dress properly
6.
. Do not wear
loose clothing or jewelry as they
can be caught in moving parts.
Protective, electrically non-conductive
clothes and non-skid footwear are
recommended when working. Wear
restrictive hair covering to contain
long hair.
Do not overreach
7.
. Keep proper
footing and balance at all times. Do
not reach over or across running
machines.
Maintain tools with care
8.
. Keep
tools maintained and clean for better
and safer performance. Inspect tool
cords periodically and, if damaged,
have them repaired by an authorized
technician.
Disconnect power.
9.
Disconnect
solar panel when security light is
disconnected or turned off.
avoid unintentional starting
10.
.
Disconnect the solar panels from
the control unit before doing any
maintenance to the light.
Stay alert
11.
. Watch what you are
doing, use common sense. Do not
operate any tool when you are tired.
check for damaged parts
12.
. Before
using any tool, any part that appears
damaged should be carefully checked
to determine that it will operate
properly and perform its intended
function. Check for any broken parts
or mounting fixtures; and any other
condition that may affect proper
reV 06k
