Page 8
For technical questions, please call 1-800-444-3353.
Item 69643
SenS (Sensitivity)
Adjust Sensitivity
(To sense small or large
moving objects).
SENS
The SENS Adjusting Knob (10) sets the level of
sensitivity of the Motion Detector Head.
The Motion Detector Head is most sensitive to
movement across the detection zone, rather than
movement toward or away from the
Motion Detector Head (6).
Movement is best detected at a distance of
40 feet or less.
Sensitivity is affected by the ambient air temperature.
If it is hot outside, the sensor has difficulty detecting
changes in heat. In cold temperatures, the sensitivity
is increased and may need to be adjusted.
minimum position
Turn the dial counterclockwise
to the minimum setting. Ideal
for cold winter conditions or
when nuisance tripping is a
problem. If the light is activated
by small animals or rapid
changes in heat, the sensitivity can be reduced by
turning the knob counterclockwise towards the
minimum setting (“-”).
maximum position
Turn the dial clockwise to the
maximum setting. Ideal for hot
summer conditions or to
maximize range.
note:
Turn the dial anywhere between the minimum and
maximum settings to adjust the level of sensitivity, as needed.
testing the light
After the battery is charged and the control Knobs are set, walk slowly around the detection area. The sensor
detects infrared radiation given off by a person or animal. This triggers the Light to turn on. The Light should go
on in the area that you set up the Security Light to monitor. Adjust the Knobs and sensor and re-test until the unit
functions as desired. Repeat the test procedure as needed when there are weather and/or temperature changes.
motion Detector Control Knobs (cont.)
Sa
Fet
Y
Ope
R
ati
O
n
m
aintenan
C
e
Setup
