background image

Page 2

For technical questions, please call 1-888-866-5797.

Item 62284

WARNING SYMBOLS AND DEFINITIONS

This is the safety alert symbol.  It is used to alert you to 

potential personal injury hazards.  Obey all safety messages 

that follow this symbol to avoid possible injury or death.

Indicates a hazardous situation which, if not avoided,  

will result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in death or serious injury.

Indicates a hazardous situation which, if not avoided,  

could result in minor or moderate injury.

Addresses practices not related to personal injury.

Important Safety Information

Read all safety warnings and instructions.  

Failure to follow the warnings and instructions may result in  

electric shock, fire and/or serious injury.  

 

Save all warnings and instructions for future reference.

Installation Safety

1. 

Keep children and bystanders away 

while installing the cameras.  Distractions 

can cause you to lose control.

2. 

Do not overreach when installing 

this product.  Keep proper footing 

and balance at all times.  This enables 

better control in unexpected situations.

3.  Wear ANSI-approved safety 

goggles during installation.

4.  This product is not a toy.  Mount 

it out of reach of children.

Operation Safety

1. 

Do not operate electrically powered 

products in explosive atmospheres, 

such as in the presence of flammable 

liquids, gases, or dust. Electrically 

powered products create sparks which 

may ignite the dust or fumes.

2. 

The adapter must match the outlet.  

Never modify the plug in any way.  

Unmodified plugs and matching outlets 

will reduce risk of electric shock.

3. 

Do not expose the Power Adapter of 

this product to rain or wet conditions. 

Water entering the Power Adapter will 

increase the risk of electric shock.

4. 

Do not abuse the Power Cord.  Never 

use the cord for unplugging the plug 

from the outlet.  Keep cord away 

from heat, oil, sharp edges or moving 

parts.  Damaged or entangled cords 

increase the risk of electric shock.

Содержание 62284













Отзывы: