background image

Page 3

For technical questions, please call 1-888-866-5797.

Item 62284

5.  WARNING: The cord of this product contains 

lead and/or di (2-ethylhexyl) phthalate 

(DEHP), chemicals known to the State 

of California to cause cancer, and birth 

defects or other reproductive harm. Wash 

hands after handling.  (California Health 

& Safety Code § 25249.5, 

et seq.

)

6.  The warnings, precautions, and instructions 

discussed in this instruction manual cannot 

cover all possible conditions and situations 

that may occur.  It must be understood by 

the operator that common sense and caution 

are factors which cannot be built into this 

product, but must be supplied by the operator.

Service Safety

1. 

Product service must be performed 

only by a qualified technician.

2. 

When servicing a product, use only 

identical replacement parts.

3. 

Maintain this product with care.  

Keep this product clean.  Do not use 

a damaged product. Tag damaged 

products “Do not use” until repaired.

4. 

Disconnect the AC/DC Power Adapter 

from the power source before making any 

adjustments, changing accessories, or 

storing this product. 

 

Such preventive safety 

measures reduce the risk of electric shock.

5.  Maintain labels and nameplates on 

the unit.  These carry important safety 

information.  If unreadable or missing, contact 

Harbor Freight Tools for a replacement.

 SAVE THESE INSTRUCTIONS.

Grounding

TO PREVENT ELECTRIC SHOCK AND DEATH FROM 

INCORRECT GROUNDING WIRE CONNECTION: 

Check with a qualified electrician if you are in doubt as to whether the outlet is 

properly grounded.  Do not modify the power cord plug provided with the system.  

Never remove the grounding prong from the plug.  Do not use the system if the power cord or 

plug is damaged.  If damaged, have it repaired by a service facility before use.  If the plug will 

not fit the outlet, have a proper outlet installed by a qualified electrician.

Figure A:  Outlets for 2-Prong Plug

1.  The included adapter does 

not require grounding.

2.  The adapter may be used in either 

of the 120 volt outlets shown in the 

preceding illustration.  

(See Figure A.)

Содержание 62284













Отзывы: