Manual-HotAir06-sdo-one-E
page 4 / 10
Intended Use of Machine
The HotAir06 SDO ONE is a solder oven for SMD component with the use of lead free paste.
All other applications require our written consent or happen on full risk of the user.
The Bungard GmbH & Co. KG accepts no liability for damages incurred in non-authorised use or
application of the machine.
Safety Instructions
IMPORTANT SAFETY RULES FORCED AIR CONVECTION OVEN
General
Please read the following instructions carefully and pay particular attention to information on operat-
ing safety and set up.
Keep these instructions at a safe place. It contains information which also refer for later mainten-
ance and cleaning.
The machines are not designed to be embedded or interconnected with other machines or systems.
They may only be used in specially equipped rooms and be operated only by qualified staff (know-
ledge in soldering recommended). Children and pets are to be kept away!
Place of installation
The oven is developed to install it free standing on a flat, dry surface. This surface or table must be
capable to carry a weight of at least 30 Kg. The oven should be used at normal room temperatures
(around 15 to 25 degrees. Do not install the oven in a closed cupboard or box (danger of fire). Do
not install the oven near a heating element or stove, or in a wet environment. Do not place the unit
near heat sources such as radiators, hot air ducts, furnace and the like.
Electricity
The machine is made from certified parts according to standard practice for electrical safety. This
does not relieve the user of his duty of care when handling electrically powered devices.
The main switch disconnects the machine from the power supply. We presuppose that the safety
fuses of the circuit and the residual current circuit are provided by the building's power supply (fuse
16A).
This oven must have a dedicated power outlet which may only be used by this oven.
High voltage - ONLY QUALIFIED PERSONS MAY OPEN THE CASING:
Don’t put the plug and the line cord into any kind of liquid. Avoid situations that liquids or other ma-
terials entering the oven through door latching or ventilation grate.
In the case this is happening:
Switch off the oven immediately and, pull the plug from the wall socket.
Be sure the line cord is not making a sharp hook or is hanging on sharp things. Avoid line cord to be
in contact with warm or hot surfaces. In case of damage only qualified persons may replace the line
cord.
After completion of work, the main switch should always be turned off.
Before all maintenance work on the machine (cleaning, etc.) turn off machine and pull the plug. In-
side the machine are high voltages which can be lead to death or serious injuries.
Pay attention to the warning signs on the machine. If you are not going to use the unit for some
time, remove the plug from the socket.
Risk of fire and burning:
When the oven is in production mode it is dangerous to leave the oven unattended, high temperat-
ure and long producing times can cause to overheat the oven (risk of fire!). When you place in - or
take out – a PCB when oven is at working temperature, use protective gloves or a heat resistant
Bungard Elektronik GmbH & Co. KG, Rilkestraße 1, 51570 Windeck – Germany
Tel.: +49 (0) 2292/9 28 28 - 0, Fax: +49 (0) 2292/9 28 28 - 29, E-mail: [email protected]
