Bully Dog 40417, Руководство пользователя

Страница: 33 / 52

32
(940) 783-9915 | www.bullydog.com
TUNING VEHICLE
INSTALLING THE TUNE – TOYOTA VEHICLES ONLY –
Toyota
®
,vehicles requires slightly different Tuning steps that are listed below.
You Have Already Selected
Do You Want To Select
Another Tune?
X of 3
Tune X has been Set.
S
TUNING
YES
NO
CODE 550
EXIT
VEHICLE DATA. Vehicle Data
Successfully Retrieved. Please
disconnect GT and go to the Bully
Dog Update Agent to get the
required files and continue the
download process. It is safe to
cycle the key. If you need any
assistance please Contact
Technical Support.
www.bullydog.com +1 (940)
783-9915
You Have Already Selected
Do You Want To Select
Another Tune?
X of 3
Tune X has been Set.
S
TUNING
YES
NO
TOP
MORE
The next screen will display
“Tune A”, “Tune B”, “Tune C”,
and “Stock”. After you select
one of these options, the GT
will ask you to Confirm the
tuning options selected.
TUNE SELECTION
press
15. Once the Tune has been
set up. Up to 3 tunes may
be configured. The tunes
are labeled in the order
that they were created, “A”,
“B”, and “C”. Power levels
for these tunes can be
duplicated.
19. Retrieve the tuning files by clicking "START". The
Update Agent will display a progress bar. Click OK
when the process is complete.
20. Remove the SD card reader from the PC and then
remove the SD card from card reader. Finally, insert
the card back into the GT Gas.
16. The code (550) at right
will display when vehicle
data has been successfully
retrieved and the GT Gas
needs to be connected to
the Update Agent.
21. Reconnect the HDMI
cable to GT Gas and go
Back to STEP 12.
22. Read Tune Selection
explanation, tap MORE
and press CONTINUE.
UNPLUG YOUR GT GAS. THE NEXT STEPS
MUST BE COMPLETED OUTSIDE THE
VEHICLE ON A COMPUTER WITH
INTERNET ACCESS.
THE NEXT STEPS MUST BE COMPLETED
INSIDE THE VEHICLE.
If setting up additional tunes, select YES
from the screen above and go back to 14.
Otherwise, proceed to the next step.
17. Open the Bully Dog
Update Agent that you
previously installed on
page 22.
18. Remove the SD card from
the GT Gas, insert the card
into its reader and then
insert it all into your PC.
Continue the installation on the next page