manualshive.com logo in svg

Bulls Lacuba EVO 45 Sport, Оригинальная инструкция по эксплуатации, Страница: 71 / 133

Поделиться
Скачать
Bulls Lacuba EVO 45 Sport Скачать руководство пользователя страница 71

MY19B103_1.0_04.01.2019

71

Operation

7.5

Rechargeable battery 

 

Risk of fire and explosion due to faulty battery

The safety electronics on a damaged or faulty battery 
may fail. The residual voltage can cause a short 
circuit. The battery may self-ignite and explode.

Remove batteries with external damage from 
service immediately and never charge them.

If the battery becomes deformed or begins to 
smoke, keep at a safe distance, disconnect the 
power supply at the socket, and notify the fire 
service immediately.

Never extinguish a damaged battery with water or 
allow it to come into contact with water.

If a battery is dropped or struck but shows no signs 
of external damage, remove it from service and 
observe it for at least 24 hours.

Faulty batteries are hazardous goods. Dispose of 
faulty batteries properly and as quickly as possible.

Store in a dry place until disposal. Never store in 
the vicinity of flammable substances.

Never open or repair the battery. 

Chemical burns to the skin and eyes caused by 
faulty battery

Liquids and vapours may leak from a damaged or 
faulty battery. They can irritate the airways and cause 
burns.

Avoid contact with leaked liquids. 

Immediately consult a doctor in case of contact with 
the eyes or any discomfort.

In case of contact with the skin, rinse off 
immediately with water.

Ventilate the room well.

WARNING

!

CAUTION

!

EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book  Page 71  Tuesday, January 8, 2019  4:38 PM

Содержание Lacuba EVO 45 Sport






































































































































Отзывы:

Нет отзывов