MY19B103_1.0_04.01.2019
113
Maintenance
Turn the axle on the quick release clockwise until
the axle is firmly in place.
Pull the lever from the recess and clamp it properly.
The clamping force of the lever is not an indication
of the tightening torque of the axle.
Setting the clamping force
If the clamping lever cannot be moved into its proper
final position by pushing it with the hand, or if it is too
loose, its clamping force will need to be readjusted.
Figure 33:
Setting the clamping force in the middle of the clamping lever (1)
with a hexagon socket spanner (2)
1
2
Open the quick release lever.
Connect a 2.5 mm hexagon socket spanner to the
middle of the clamping lever.
Turn the hexagon socket spanner:
• turn clockwise to increase the clamping force and
• anti-clockwise to reduce the clamping force.
Clamp the clamping lever.
If the clamping lever is not yet in the proper final
position, repeat the steps until the proper final
position has been achieved.
EN_MY19B103_1.0_BULLS Brose Lacuba Evo 45 Sport MY19_Inhalt.book Page 113 Tuesday, January 8, 2019 4:38 PM