RM1250 User Guide
15
Figure 2-7. Battery Connections
a
Connect the larger, round battery to the
P4
connection.
b
Connect the bundled pair of batteries to the
P3
connection.
N
OTE
:
Once the batteries are connected to the unit, a Startup packet is sent to your Bullhorn Web
account.
8
Place the RM1250 unit onto the base. Align the cut-out below the Bullhorn label on the dome to the
screw (next to blue dot) on the base.
N
OTE
:
If you plan to configure the unit using a USB 5-pin mini-b cable instead of Bluetooth, do not
place the unit on the flat base. Configure the unit first and then secure the unit on the base. Refer to
Chapter 1,
Configuration
for configuration instructions.
