BullFrog OD0821 ROCKfrog Скачать руководство пользователя страница 9

L

L

Rope installation, runners: 

OD0821 ROCKfrog

 ©  2 0 2 1

  K U R T   B E I E R   &   K A T I   Q U I N G E R

Minimum ground clearance: 4 cm 

5 adjustment options in 5 cm steps:

Possible ceiling heights: 230/235/240/245/250.

The adjustments have to be identical front/back and left/right.  

Attention! In case of made-to-measure products, the 

basic position

 is defined in the 

middle (i.e. position P3)

 of the adjustment 

options. Thus, you are able to adjust the height each by two steps upward and downward.   For a detailed description, 
please see 

“Montage bei Maßanfertigung”

.

Rope position:

The rope lying up front in the carbine is 

also hooked in at the front of the runner. 

The rope lying in the back in the carbine

is hooked in at the back of the runner.

Bodenabstand mind. 4 cm

L

L

L

P1

Positions

P1

L

L

L

P1

P1

P1

P1

P2

P3

P4

P4

P5

P5

P5

Attention!
All 4 ropes have to be fastened in the same position 
at the front and the back.

Example below: 

4 x at the outermost position (L) 

and 4 x at position (P1).
If you should e.g. have a ceiling height of 230, please 
use position (L) 4 times and position (P5) 4 times, etc.

The loop must always be fastened at position (P1, P2, P3, P4 or P5);

at position (L), the rope is wrapped around a bolt (U1).

P2 P3

U1

U1

U1

U1

Содержание OD0821 ROCKfrog















Отзывы: