BullFrog OD0821 ROCKfrog Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 14

BullFrog OD0821 ROCKfrog Скачать руководство пользователя страница 13

Safety Instructions!

Please observe the following safety instructions for your pleasure with ROCKfrog:

No liability shall be assumed in case of any improper use.

Please check the mounting for signs of wear and tear or damages on a regular basis.
In case or worn or damaged parts, please immediately replace the defective parts for
your own safety..

No liability shall be assumed for direct and indirect consequential damages caused by
modifications of this product, the equipment, the performance and the material usage
done by the customer.

Subject to changes and error.

You have observed all of the safety instructions? Then, Bullfrog wishes you a good rocking time!

Attention! You will find all of the important information in those documents. Please save those documents
for future reference.

Our product ROCKfrog is tested according to the following directive:

Risk assessment according to

EN 12520

NORM: EK5/AK3 20-01:2020

Maintenance care of the runners:

In order to keep not used threads serviceable, it is required to regrease them with machine lubricant.

OD0821 ROCKfrog

© 2 0 2 1

K U R T B E I E R & K A T I Q U I N G E R

«
...
11
12
13
14
»

Содержание OD0821 ROCKfrog















Отзывы:

Нет отзывов