SYSTEM FEATURES
SYSTEM COMPONENTS
TECHNICAL ASSISTANCE
Should you need help. First check our website at www.bulldogsecurity.com/wires.htm or call our toll-free
Tech Support Hotline Monday through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-878-8007.
You must give the following information:
•Name
•Telephone Number with Area Code (Fax number if applicable)
•Year, Make, and Model of the vehicle
•The model number of the system you are installing
•The type of assistance you are requesting
If you give the above information you will be called back as soon as possible, usually within 10 minutes.
1
Microprocessor Controlled
Allows the use of fewer parts for less trouble and longer life; and monitors entire electrical
system.
Tach or Tachless Installation
Gives customer preference for either tach or tachless sensing mode. Allows installer a quicker
installation.
Parking Light Supervision
The parking lights will stay on when the engine is running. Never walk up to a dark car again.
Engine Monitor
Should your engine not start the first time, the computer will cause the starter to try again
up to three times.
Limited Lifetime Warranty
Guarantees life-long protection.
Your system includes:
1-Installation & Operation Guide
1-Main Control Module
1-(3) Relay Harness with Relays
1-12-pin Wire Harness
REQUIRED TOOLS
1-Hood Pin Switch
1-Warranty
1-Warning Sticker for Under the Hood
2-Bulldog Window Decals
You will need a computer-friendly test light and a 5/16 drill bit when mounting the hood pin switch. In
most cases no additional tools are required, however if the bottom of your dash on the driver’s side will
come off you must remove it. In this case a screwdriver or socket set may be needed.
BEFORE YOU BEGIN
Congratulations, you have purchased one of the most advanced starter systems ever made. Your new starter
is a technological breakthrough utilizing the most advanced, state of the art technology and components.
It is computer controlled and manufactured in the U.S.A. The dependability and variety of features make
Bulldog Security the leader in the industry. Enjoy your new remote starter for years to come!
This remote system is designed to start your vehicle by sending a command signal from the remote transmitter
or by programming automatic temperature or timed start. It is required that your installation is done in
a well-ventilated area. It is the responsibility of the owner to ensure that the remote system is not
used to start the vehicle in an undesired location.
It is recommended that a carbon monoxide detector be installed in the living area near a location where
the vehicle may be garaged.
Since there are many different makes and models of vehicles, look at the wiring chart on or our website,
www.bulldogsecurity.com/wires.htm.
MAKE SURE YOU PLACE THE WARNING STICKER UNDER THE HOOD.