TECHNICAL ASSISTANCE
BEFORE YOU BEGIN
2
PRECAUTIONS
This system is designed for use with vehicles equipped with fuel-injected,
gasoline engines with automatic transmissions only.
SAFETY FIRST!
Never remotely start your vehicle indoors, with the keys in the ignition or unless the transmission
is in park. A periodic safety check is recommended to ensure that your system is in proper working
order.
DO NOT use mechanical wiring connections, such as crimp or snap together wire connectors.
Instead, follow the instructions on page 3-4.
DO NOT disconnect the battery if the vehicle has an anti-theft-coded radio or is equipped with
an airbag. Doing so may cause a warning light to be displayed which may require a trip to the
dealer to be corrected.
DO NOT leave the interior or exterior lights on for an extended period of time as it may cause
battery drain. Remove the dome light fuse from the vehicle’s fuse box. NOTE: Starter systems do
not work well with a partially discharged battery.
WARNING!
GENERAL MOTORS REAR WHEEL DRIVE VEHICLES AND DODGE DAKOTAS
All General Motors rear wheel drive vehicles and Dodge Dakotas built prior to 1996 do not have
an electrical neutral safety switch. They have a mechanical neutral safety switch. The mechanical
neutral safety switch operates as follows.
a)The key will only turn to the start position when the gear selector is in park or neutral.
b)The key can only be removed from the ignition switch when the gear selector is in the park
position.
You must use special precautions with this system.
Should you need help. First check our website at www.bulldogsecurity.com or call our toll-free Tech Support
Hotline Monday through Friday 9AM-8PM and Saturday 10AM-4PM EST at 800-878-8007.
You must give the following information:
•Name
•Telephone Number with Area Code (Fax number if applicable)
•Year, Make, and Model of the vehicle
•The model you are installing
•The type of assistance you are requesting
If you give the above information you will be called back as soon as possible.
Please do not skip any steps.
If your vehicle has an anti-theft system, you will need an additional module, Part #781 or #791.
Congratulations, you have purchased one of the most advanced remote starter/alarms systems ever made. Your
new remote starter/alarm is a technological breakthrough utilizing the most advanced, state of the art
technology and components. It is computer controlled and manufactured in the U.S.A. The dependability and
variety of features make Bulldog Security the leader in the industry. Enjoy your new remote starter for years
to come!
This remote system is designed to start your vehicle by sending a command signal from the remote transmitter.
It is important that your installation be done in a well-ventilated area. It is the responsibility of the
owner to ensure that the remote system is not used to start the vehicle in an undesired
location.
It is recommended that a carbon monoxide detector be installed in the living area near a location where the
vehicle may be garaged.
Since there are many different makes and models of vehicles, look at our website, www.bulldogsecurity.com.
Read this manual thoroughly before starting the installation.
TACH/TACHLESS OPERATION
In most cases the decision to go with tachless mode will save time during the installation. If your vehicle
is hard-starting then you should use tach mode.
MAKE SURE YOU PLACE THE WARNING STICKER UNDER YOUR HOOD.
