791 UNIVERSAL BYPASS MODULE
The Model 791 interface module is used when
installing remote start products in any vehicle equipped
with an anti-theft system including BMW, Audi, Volvo
and Mercedes. The Ford PATS, GMs PK3, VATS,
Passlock I, Passlock II or any other transponder
systems. This model allows easy interfacing while
maintaining the OEM system’s integrity. The Model
791 has no affect on factory anti-theft system when
the remote start is not in use. The factory anti-theft
system remains fully functional.
BEFORE YOU BEGIN
Refer to your system’s instruction manual, and
our website at www.bulldogsecurity.com, to
determine what type of anti-theft system your
vehicle is equipped with.
It will be necessary to open the 791 Module to remove
the wiring harness before installation. To do so, simply
insert a straight shank screwdriver into the two wide
slot holes in the bottom of the module. Plug the wiring
harness into the module. NOTE: If you are using
the 791 Module as a transponder bypass you
must insert a spare ignition key inside the black
ribbon coil (as illustrated on page 9) then snap
both halves of the module back together. This
key must be a key that starts the vehicle.
2
11
WARRANTY VALIDATION
Mail to: JBS Technologies
225 Technology Way
Steubenville, Ohio 43952
PLEASE FILL OUT THIS FORM AND MAIL IT
IN TO REGISTER YOUR WARRANTY
Your Name ________________________
Address __________________________
_________________________________
Email Address _____________________
Dealer Name ______________________
Address __________________________
_________________________________
Date of Purchase ____/____/____
Model #791
Make/Model of Car __________________
Year of Car _____
V.I.N. # __________________________
Final Quality Check By _______________
