©2006 Bullard. All rights reserved.
Bullard is a registered trademark of Bullard.
“It’s your life and you’re worth it”, and TACSIGHT SE35 are
trademarks of Bullard.
6050047615 (1206)
ISO 9001
certified
Warranty
Bullard warrants to the original purchaser that the TacSight SE35 Thermal Imager and
transmitter if applicable, are free of defects in materials and workmanship under intended use
and service for a period of one (1) year from date of manufacture. The company’s obligation
under this warranty is limited to repairing or replacing, at the company ’s option, articles that are
returned within the warranty period and that, after examination, are shown to the company’s
satisfaction to be defective, subject to the following limitations:
a) Article must be returned to Bullard with shipping charges prepaid.
b) Article must not be altered from its original configuration.
c) Articles must not have been misused, abused, or damaged in transport.
d) Maintenance and field replaceable items, if defective, are covered under warranty for a ninety
(90) day period.
These items include:
• Batteries
• Straps
• Battery chargers
• Display covers
• AC/DC adapters
• All accessories except transmitter
Bullard provides a limited lifetime warranty on the TacSight SE35 Thermal Imager outer shell. This
warrants that the outer shell is free of defects in materials and workmanship under intended use
and service for the original purchaser. The company’s obligation under this warranty is limited to
repairing or replacing, at the company’s option, articles that after examination are shown to the
company’s satisfaction to be defective, subject to the following limitations:
a) Article must be returned to Bullard with shipping charges prepaid.
b) Article must not be altered from its original configuration.
c) Article must not have been misused, abused or damaged in transport.
d) When the outer shell is obsolete and Bullard no longer stocks the part, the limited lifetime
warranty will be terminated.
In no event shall Bullard be responsible for damages, loss of use or other indirect, incidental,
consequential or special costs, expenses or damages incurred by the purchaser, notwithstanding
that Bullard has been advised of the possibility of such damages.
Any implied warranties, including warranties of merchantability and fitness for a particular
purpose, are limited in duration to one (1) year from the date of manufacture of this product.
Some states do not allow the exclusion or limitation of incidental or consequential damages or
allow limitations on how long an implied warranty lasts, so the above limitations or exclusions
may not apply to you. This warranty gives you specific legal rights, and you may have other rights
that vary from state to state.
Extended Warranty
The extended warranty has all the same terms and conditions as the one-year warranty, except
it is for the period of two years. This warranty can be purchased directly from Bullard or through
any authorized Bullard distributor. The extended warranty must be purchased within 30 days of
the original order.
Bullard
1898 Safety Way
Cynthiana, KY 41031-9303
Toll free: 877-BULLARD (285-5273)
Tel: 859-234-6616
Fax: 859-234-8987
www.bullard.com
Bullard GmbH
Lilienthalstrasse 12
53424 Remagen
Germany
phone: +49-2642 999980
fax : +49-2642 9999829
www.bullardextrem.com
Bullard Asia Pacific Pte. Ltd.
Cisco Centre
20 Jalan Afifi, #08-03
Singapore 409179
Tel: +65-6745-0556
Fax: +65-6745-5176
www.bullard.com
HANDLETRANSONLY
Four-channel wireless remote transmitter (housed in quick-attach handle) -
receiving system not included
HANDLETRANSONLY2
Two-channel wireless remote transmitter (housed in quick attach handle) -
receiving system not included
ML1
MobileLink two-channel handheld receiver with one 10 V NiMH rechargeable
battery and one 10 V charger with 110 VAC (USA only) and 12 VDC adapter
ML2
MobileLink two-channel handheld receiver only
ML3
MobileLink four-channel handheld receiver with one 10 V NiMH rechargeable
battery and one 10 V charger with 110 VAC (USA only) and 12 VDC adapter
ML4
MobileLink four-channel handheld receiver only
MCC1
Mobile Command Center two-channel receiver with recorder
MCC2
Mobile Command Center two-channel receiver without recorder
MCC3
Mobile Command Center four-channel receiver with recorder
MCC4
Mobile Command Center four-channel receiver without recorder
REC
Four-channel receiver system (includes the antenna, receiver, and all associated
cabling necessary for receiving transmitted video signal)
REC2
Two-channel receiver system (includes the antenna, receiver, and all associated
cabling necessary for receiving transmitted video signal)
NIMH
10 V NiMH rechargeable battery
RCN17ALK
AA Alkaline Battery Case
HANDLE
Attachable handle for TacSight series
HANDLEVO
Attachable handle with video out for TacSight series
TACSTRAPKIT
Replacement strap kit includes left and right side straps
TACWINDOW
Replacement hard coated polycarbonate display cover
T3CHARGERBASE
Charger for NiMH rechargeable batteries
15VADAPTOR
15 Volt AC adaptor for use with T3 Charger Base
CARADAPTOR
DC Car Adaptor for use with T3 Charger Base
T3RETRACT
Retractable strap kit that keeps the TacSight convenient yet out of the way
TACPMKIT
Field Service kit for “wear and tear” items for your TacSight in a convenient
bundled package - includes display cover window, side straps, and one battery
TACPM
Preventative maintenance factory service package to keep your TacSight
performing and looking like new
TACSIGHTEXT
Original limited warranty extended one full year
Ordering Information
CATALOG NUMBER
DESCRIPTION
CATALOG NUMBER
DESCRIPTION
