Bull R425-E2, Инструкция по установке и эксплуатации

Страница: 41 / 156

Chapter 5: Advanced Serverboard Setup
5-7
5-5 Installing the Processors and Heat Sinks
!
When handling the processor package, avoid placing direct pressure on
the label area of the fan.
Installing an LGA 1366 Processor
1. Press the socket clip to release
the load plate, which covers the CPU
socket, from its locking position..
2. Gently lift the socket clip to open the
load plate.
Notes :
Always connect the power cord last and always remove it before adding, re - 1.
moving or changing any hardware components. Make sure that you install the
processor into the CPU socket before you install the CPU heatsink.
Make sure to install the motherboard into the chassis before you install the 2.
CPU heatsink and heatsink fans.
When purchasing a 5500 Series processor or when receiving a motherboard 3.
with a 5500 Series processor pre-installed, make sure that the CPU plastic
cap is in place, and none of the CPU pins are bent; otherwise, contact the
retailer immediately.
Refer to the 4. Serverboard Features Section on page 1-2 for more details on
CPU support.
3. Hold the plastic cap at its north and
south center edges to remove it from
the CPU socket.
Socket clip
Plastic cap
Hold the north and south edges of
the plastic cap to remove it
Load plate