Bull Novascale R423-E2 Скачать руководство пользователя страница 121 | Manualshive

Страница: 121 / 146

Bull Novascale R423-E2 Скачать руководство пользователя страница 121

Appendix B: Intel HostRAID

B-9

Resetting to Non-RAID and Resetting

a RAID HDD

a. From the main menu, select item3-Reset Disks to Non- RAID, and press <En

-

ter>. The following screen will appear:

b.  Use  the  <Up  Arrow>,  <Down  Arrow>  keys  to  highlight  the  RAID  set  drive  to
reset and press <Space> to select.
c. Press <Enter> to  reset the RAID set drive. A Warning message displays.
d. Press "Y" to reset the drive, or type "N" to go back to the main menu.
Exiting the Intel Matrix Storage Manager Utility:
a.  From  the  main  menu,  select  item4-Exit,  and  press  <Enter>.  A  warning  mes

-

sage will appear.
b. Press "Y" to reset the drive, or type "N" to go back to the main menu.

Warning:

Be cautious when you reset a RAID volume HDD to non-

RAID or Resetting a RAID HDD. Resetting a RAID volume HDD or
Resetting a RAID HDD will reformat the HDD and delete the internal
RAID structure on the drive.

«
...
119
120
121
122
123
...
»

Содержание Novascale R423-E2



















































































































































Отзывы:

Нет отзывов