Bull Escala EPC1200, Руководство по подключению, Страница: 175 / 224

10-65
Disk Subsystems Cabling Requirements
M.I. FRU Length Designation
CMOF006–0000 1024MB Cache UPG.for CDA4000
MSOF303–9002 DRV3030–92 9GBX2 3,5”
MSOF303–2302 DRV3030–232 23GBX2 5,25”
CBLF017–1800 6M SCSI /non AIX(SUN,HP,DEC..)
CBLF018–1100 Y–CBL for IBM Cluster
CBLF019–1100 Y–CBL for Sequent Cluster
CBLF020–1100 Y–CBL for Multi Host Cluster
CBLF009–1900 Wide DF SCSI Cable 68pin
EPC800 12m
CBLF009–2100 Wide DF SCSI Cable 68pin
EPC800 25m
CBLG157-1100 SCSI-2 Cable (68MD/68MD) 1m 90676006-002
CBLG157-1300 SCSI-2 Cable (68MD/68MD) 2m 90676002-002
CBLG157-1700 SCSI-2 Cable (68MD/68MD) 6m 90676003-002
CBLG157-1900 SCSI-2 Cable (68MD/68MD) 12m 90676004-002
General Overview
A Symmetrix box is composed of a dual internal bus (X and Y buses) on which are
connected Channel Directors (CD), Cache memory cards and Disk Directors (DD).
The Channel Directors manage host links. They are available in two versions which can be
mixed in the same Symmetrix subsystem:
•
Ultra Wide SCSI Directors containing 4 host ports
•
Fibre Channel Directors containing 2 host ports
The DIsk Directors manage four fast wide SCSI buses to the internal disks. Depending on
the model, either 4 or 6 disks are connected on each internal SCSI bus.
Optionally, Remote Link Directors (RLD) can be plugged to connect two different Symmetrix
boxes in an SRDF configuration which allows to manage mirrored volumes across the two
boxes.
The attachment of a Symmetrix Fast Wide Differential SCSI port on an AIX server is made
using the standard MCA or PCI adapters:
MCA: MSCG020-0000 SCSI-2 F/W DE Enhanced Disk Adapter (WSA)
MSCG012-0000 SCSI-2 F/W DE Ext Disk Adapter (Corvette Turbo)
PCI: MSCG030-0000 Ultra SCSI Differential Disk Adapter on EPC1200/A
MSCG023-0000 Ultra SCSI DE Disk Adapter on EPC400
The attachment of a Fibre Channel port of a Fibre Channel Director to an AIX/PCI server is
made through an EMULEX LP7000E adapter. The LP7000E AIX driver supports the
Symmetrix FC-AL subsystems.
Note: The Symmetrix Fibre Channel port uses a fiber optic connector. So, a fiber optic
cable must be used for the connection to the Symmetrix and an MIA must be
connected to the other end of the cable. The copper side of the MIA is connected to
an Emulex adapter or to a hub port.