Bull bullx blade system, Руководство по установке, Страница: 57 / 82

Chapter 4. Connecting and testing the bullx blade system
41
4.2 Powering on the bullx blade system for the first time
After you connect the bullx blade system to the power supply, the CMM comes up first.
However, the bullx B500 compute blades in the bullx blade system are not turned on. You
can power on the blades with either of the two options:
•
Press the power-control button on the LCP
Or
•
Through the Chassis Hardware Console > System Control > Power page, select the
blades and click Power On button
Notes
•
To use the Chassis Hardware Console (CHC), cabling of the CMM is required first
explained in section
30H
4.5 Connecting the bullx blade system to the site LAN
•
If you click Power On button in Whole Chassis power, then all the blades are powered
On provided that the Drawer Power On Mode is set to Full Power On
•
By default, the LCP button is disabled