Bull 1GB Intel Ethernet Switch Module, Инструкция по установке и эксплуатации

Страница: 131 / 308

Web-Based Network Management
105
assert registration for the same attribute in order to maintain uninterrupted service. Enter a
number between 20 and 600 (0.2 to 6.0 seconds). The factory default is 60 centiseconds (0.6
seconds). An instance of this timer exists for each GARP participant for each port.
Leave All Timer (centisecs)
The Leave All Timer controls how frequently LeaveAll PDUs are generated. A LeaveAll
PDU indicates that all registrations will shortly be deregistered. Participants will need to
rejoin in order to maintain registration. The Leave All Period Timer is set to a random value
in the range of LeaveAllTime to 1.5*LeaveAllTime. The timer is specified in centiseconds.
Enter a number between 200 and 6000 (2 to 60 seconds). The factory default is 1000
centiseconds (10 seconds). An instance of this timer exists for each GARP participant for
each port.
Click the Apply button to update the switch with the values you enter. If you want the switch to
retain the new values across a power cycle you must perform a save.
IGMP snooping
This menu provides access to the Internet Group Management Protocol (IGMP) snooping
configuration and status screens. Menu options are:
•
Configuration and status
• Interface configuration
Configuration and status
Use this menu to configure the parameters for IGMP snooping, which is used to build forwarding
lists for multicast traffic.