Bull Cedoc Bull Escala 2104 TS4, Руководство по установке

Страница: 60 / 87

One adapter in one host system connected to two 2104 Model
TS4s
Figure 35 shows one adapter in one host system connected to two 2104 Model
TS4s (single-bus mode).
1
SCSI interface card.
Note: The second SCSI interface card that is in the 2104 Model TS4 is optional.
2
SCSI adapter of one of these types:
v PCI Dual-Channel Ultra3 SCSI Adapter (type number 4-Y, feature code 6203)
v PCI 4-Channel Ultra3 SCSI RAID Adapter (type number 4-X, feature code 2498)
v PCI-X Dual Channel Ultra320 SCSI adapter (type number 5702, feature 5712)
v PCI-X Dual Channel Ultra320 SCSI RAID Adapter (type number 5703, feature
code 5703)
Important: An RS/6000 or IBM
Eserver
pSeries computer running Linux for
pSeries uses the following to connect to the 2104 Model TS4.
v PCI 4-Channel Ultra3 SCSI Adapter (type number 4-Y, feature code 6203)
v PCI-X Dual Channel Ultra320 SCSI Adapter (type number 5702, feature code
5712)
v
PCI-X Dual Channel Ultra320 SCSI RAID Adapter (type number 5703, feature
code 5703)
Note: The 2104 Model TS4 can be connected to an integrated SCSI port instead of
to one of these adapters.
Notes:
1. The SCSI address of the adapter that is connected to the 2104 Model TS4 must
be different from the addresses of the installed disk drive modules.
2. These configurations are valid with or without an additional integrated port.
2104 Subsystem
1 1
1 1
2104 Subsystem
2
Host System
Figure 35. One adapter in one host system connected to two 2104 Model TS4s (single-bus
mode)
32
2104 Model TS4 Installation Guide