8
Depth gauge
The depth stop is used to limited the maximum drilling depth.
Loosen the side grip (3).
Insert the depth stop (10) in the hole in the holder of the side grip.
Adjust the depth stop to the required drilling depth.
Tighten the side grip firmly.
Inserting SDS PLUS accesories
Clean tools with a thin layer of machine grease before fitting
Push and rotate the dust-free tool into the tool holder as far as it will go. The tool will lock
automatically.Check that it has locked by pulling the tool
Removing SDS PLUS accessories
Pull back fastening sleeve,hold and remove tool
Inserting accessories without SDS PLUS system
Use the provided drill chuck with SDS PLUS adapter
Operation
Do not use for hammer-drilling or chiselling accessories without SDS PLUS
system
Selecting the operation mode
Drilling
:for drilling in wood, metal, plastics and soft stone, deactivate the
hammer action by rotating the switch (5) counterclockwise.
Hammer drilling
:for drilling in concrete or hard stone, reactivate the hammer
action by rotating back the switch (5) to the position
Adjust chisel position
for chiseling operation
Chiselling
:deactivate the drilling action by turning the selector (5) until the arrow
coincides with the mark on the machine case
Dust collection device
Before performing hammer drilling work vertically overhead pull dust collecting device over the drill
bit.
Switching ON and OFF
Connect the tool to the power supply.
To start the machine, you squeeze the ON / OFF switch (6). To stop the machine, you release the
ON / OFF switch.
Continuous mode
To switch the machine to continuous mode, keep the on/off switch (6) pressed and at the same
time press the lock-on button (7). Subsequently release the on/off switch.To switch off continuous
mode, press the on/off switch again.
Cleaning and maintenance
Before performing any work on the equipment, pull the power plug.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.If the dirt
Содержание RH 800 SDS PLUS
Страница 1: ...1 MANUAL DE UTILIZARE USER S MANUAL CIOCAN ROTOPERCUTOR ROTARY HAMMER RH 800 SDS PLUS...
Страница 10: ...10...
