7
tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled
cords increase the risk of electric shock.
When operating a power tool outdoors, use an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces the risk of electric shock.
Personal safety
Use safety equipment. Always wear eye protection. Using safety equipment such as a
dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed
will reduce the risk of personal injury.
Avoid accidental starts. Ensure the switch is in the off position before inserting the plug.
Carrying power tools with your finger on the switch or plugging in power tools when the
switch is in the on position makes accidents more likely.
Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and
gloves away from the power tool. Loose clothes, jewellery or long hair can become
entangled in the moving parts.
Service
Your power tool should be serviced by a qualified specialist using only standard spare parts. This
will ensure that it meets the required safety standards.
Specific safety instructions for rotary hammer
Always use the auxiliary handle for maximum control.
When drilling walls or ceilings ensure that are not hidden cables and during operations you
should not touch the metal parts of the powertool, only operate the tool by holding plastic
housing.
Do not touch the bit after operation. It could be very hot.
Application
The rotary hammer is intended for personal use for drilling and chiselling of : wood, metal, plastic,
masonry, concrete.. IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Description
1.SDS PLUS Chuck
2.Dust cap;
3.Auxiliary handle
4.Depth stop blocking system
5.Drill stop
6.On/OFF switch
7.Continuous mode
8.Forward/reverse selector
9. Auxiliary chuck with SDS PLUS adapter.
10. Depth stop
Assembly
Disconnect the power plug before carrying out any adjustments or maintenance.
Auxiliary handle
The auxiliary handle (3) will provide additional control, support and guidance for the drill.
Slide the holder of the side grip over the drill chuck on the machine.
Turn the side grip in the required position and tighten it firmly.
Содержание RH 800 SDS PLUS
Страница 1: ...1 MANUAL DE UTILIZARE USER S MANUAL CIOCAN ROTOPERCUTOR ROTARY HAMMER RH 800 SDS PLUS...
Страница 10: ...10...
