© 2014 General Motors. All Rights Reserved
17
To Disable the eAssist System
Important:
To avoid accidental reconnection of the cut
cable, remove a section of each cable to
ensure they cannot inadvertently reconnect.
To avoid personal injury in an emergency
situation the eAssist system must be disabled.
To disable high voltage:
1.
Turn ignition to “OFF” position
2.
Cut the black 12 volt battery cable
at yellow tape
3.
Cut the auxiliary power module
cable located rearward of the 12
volt battery at yellow tape
Note:
After disabling 12 volt power, wait 1
minute to allow any un-deployed airbag
reserve energy to dissipate.
Use key or
push button to
turn off ignition
12 volt battery cable
Auxiliary Power
Module Cable
